3-Pin Addressable LED Cables

Pair of Male/Female 3-pin addressable LED cables This is the standard connectorization for addressable LED strips  Wire a female cable to the CANdle to easily connect and disconnect from CTR Electronic's LED strips. Please see the table below for...

USB Type C Wire Breakout

0.3 (1ft) Meter USB Type C Male to Exposed Power Wires Can be used with the CANdle to power USB Type-C devices with 5V Red Wire +USB (5V), 22AWG Black Wire -USB (0V), 22AWG

USB Micro Power Wire Breakout

0.3 (1ft) Meter USB Micro Male to Exposed Power Wires Can be used with the CANdle to power USB Type-C devices with 5V Red Wire +USB (5V), 22AWG Black Wire -USB (0V), 22AWG

Limit Switch Wire Assembly

A 4-pin JST cable interfaces with the Talon FX to connect forward and reverse limit switches signals to the controller.This product includes a 4-pin JST connector with differently colored, pre-crimped wires inserted into the connector. The other ends of...

Data Cable Extender (5 Pack)

A simple cable extender module. Connect two data cables (PN 14-886867) together for increased length for either the Talon SRX or the Hero Development Board. Connect two data cables (PN 14-886867) together for increased length.

Battery Beak - Tamiya to SB-50A Cable

Product Overview: This is a Tamiya to Anderson SP-50A power cable. Use this connector with the Battery Beak when needing to check and test batteries for the VEX Robotics and FTC competitions. No more guessing if your batteries are fully charged. Go...

Gadgeteer Breakout Module (5 Pack)

This module breaks-out the Gadgeteer socket pins on a 0.1" header placement. This is excellent for wiring circuits in or out of a main-board and also for wiring Gadgeteer modules with non-Gadgeteer systems. This is a set of 5 Breakout Modules.

Talon SRX Encoder Breakout Board

This breakout board makes wiring a quadrature encoder or a limit switch to the Talon SRX quick and easy. When connected to the Talon SRX through a ribbon cable , the breakout board provides solder pads for quadrature encoders (on the top) and limit...

Talon SRX Analog Breakout Board

This breakout board makes wiring 5V analog sensors to the Talon SRX quick and easy. When connected to the Talon SRX through a ribbon cable, the breakout board provides solder pads to help connect your necessary sensors. This breakout board is designed...